Australian Standard Hot Dip Galvanized High Security Anti Climb Corromesh 358 Security Fencing
1. Product description
SUPERIOR CORROSION RESISTANCE
It's made to the highest quality standards, using only premium quality Australian wire, incorporating Zalcote coatings (zinc
alloy.) Zalcote coated wire has superior coating uniformity and alloy layer integrity, producing longer life with a smoother
coating surface.
• 95% Zinc 5% Aluminium coated wire has superior corrosion resistance compared to galvanised wire, especially in
marine environments.
• From salt spray test results, 5% Aluminium coated wire lasts 3-4 times longer than galvanised wire.
• In severe marine environments, 5% Aluminium coated wire has lasted more than 3 times longer than galvanised wire.
|
|
|
Typical Corromesh® Safety Channel Side Fixing Detail
FENCE POST Corromesh using the channel is extremely retrofittable and works with: RHS, SHS, CHS.
• 65 x 65 x 2.5mm RHS Post (1.8 Panel) 2500mm Long, Footing Depth 650mm
• 65 x 65 x 2.5mm RHS Post (2.1 Panel) 2900mm Long, Footing Depth 750mm
• 75 x 75 x 3.0mm RHS Post (2.4 Panel) 3300mm Long, Footing depth 850mm
|
ypical Corromesh® Overlap Fixing DetailSecurity Washer
FIXING DETAIL
• Corromesh Vertical Channels
• Corromesh U Clips (3 x Per Channel)
• Security Screws - 25mm or 50mm
PANEL SIZES 2404mm Wide x1800mm High
2404mm Wide x 2100mm High
2404mm Wide x 2400mm High
2404mm Wide x2700mm High 2404mm Wide x3000mm High
|
CORROMESH PATTERN
• 75mm x 13mm resistance welded at each intersection.
• Horizontal Wires 3.15mm dia. at 13mm centres.
• Vertical Wires 4.0mm dia.at 75mm centres.
• Extended at top to provide a spike topping.
• 2 x Additional Vertical Edge wires at 37mm per panel.
• Mesh corrugations approximately 95mm pitch x 28mm deep overall.
• Standard sheet size 2404mm width x 1800, 2100, 2400mm height
•Tolerance: Width ± 2.00mm Length ± 2.00mm
• Formed top 50mm x 90 degree to support Razar Tape® (if required)
CORROMESH MATERIAL
• Horizontal Wires 3.15mm drawn wire.
• Vertical Wires 4.0mm drawn wire.
• Tolerance ± 0.08mm
• Yield strength 375-470MPa
•Tensile strength 500-625MPa
• Welded to minimum 60% of wire tensile strength
• Australian Standard for coating AS 4534-2006 W05
•Coating: Zinc Alloy 160-260 gsm sqm
• Australian Standard for coating AS 4534-2006 W05 Australian Security Fencing P/L
Corromesh 358 Coatings
Corromesh 358 panels are manufactured from 95% zinc, 5% aluminium zalcote wire, providing the ultimate level of corrosion protection - outlasting regular galvanised wire products by 2-3 times.
The 95% zinc, 5% aluminium coating has been tried and tested to withstand the harshest Australian environments.
Corromesh panels are also available in a premium polyester powdercoated finish to suit customer environmental, architectural and commercial requirements.
Corromesh 358 Applications
* Utilities Facilities
* Correctional Facilities
* Transport Facilities
* Critical Infrastructure
* Education Sector
* Commercial/Industry Properties
Key Features
* Proven performance
* Engineered structural framework
* Guaranteed weld strengths
* Attractive and discreet appearance
* Unique double edge-wire system
2. Fence specification
|
Panel width
|
2400mm, 2404mm
|
|
Panel height
|
1800mm to 3000mm
|
|
Panel wire
|
3.15mm,4.0mm
|
|
Style
|
V bend anti climb fence
|
|
Type
|
high security fence
|
|
Name
|
358 Anti Climb Security Fence
|
|
Accessories
|
posts and clamps
|
|
Packing
|
Pallet
|
|
Surface treatment
|
Galvanized+Powder Coated
|
|
Application
|
Fence Mesh
|
3. Product details
Corromesh® 358 High Security Mesh Data Sheet
Design
Horizontal corrugations give Corromesh® 358 a contemporary, stylish, and distinctive appearence whilst providing maximum strength. Corromesh® 358 sheets can be stepped evenly over uneven landscapes and fixed to any style of post or structure.
Quality & Testing
Corromesh® 358 mesh is guaranteed to meet the specific standards for raw materials and coatings. The weld manufacturing process has a Quality Plan utilising stringent quality control procedures. Mesh sheets weld tested to 65% of minimum wire strength.
Performance & Durability
Unique tensile properties make Corromesh® 358 several times harder to penetrate than other high security fences.
Finishes
Zinc/Alloy is a high anti-corrosive surface finish applied to a 4mm and 3.15mm medium tensile wire. In external atmospheric conditions, a zinc/5% aluminium coating offers from two to four times greater protection per unit coating mass than hot dipped galvanised zinc coatings.
Recommended Fixings
Recommended fastening for Corromesh® 358 to CHS, RHS or SHS sections via 35mm self drilling screws or 50mm tamper proof self drilling security screws. Recommended fixing is through a 'corromesh safety channel', this provides extra security around the fixing point and a faster, more economical installation for customers.
Appropriate Standards
Corromesh® 358 4mm and 3.15mm diameter wire is procured via AS/NZS 4534-2006.
4. Product benifits
Highly anti-corrosive zinc alloy finish ✓ Anti-climb, finger proof apertures with spike top ✓ Light weight, extremely rigid weld
mesh sheet ✓ Quick and easy to install ✓ Can be retrofitted to existing posts (RHS, SHS, etc.)
5. Product application
Corromesh® is suitable for any situation that requires a high security barrier with anti-climb, anti-cut qualities combined with
an unobtrusive appearance. • Parks and waterways fencing • Council Depots • Government Utilities: Water, Electricity, Gas, Rail,
Bridges etc. • Industrial developments • Schools
6. Fence packing and loading
Security welded fence panel wrapped with plastic film in canton box and then put on metal/wooden pallet.
Fence post wrapped with plastic strip and in bulk or on metal/wooden pallet.
The welded mesh fence accessory in carton box.
Audited Supplier 
){kind=link}